COMET M1322 Ethernet Multilogger - thermo-hygro-CO2 meter with 2 MiniDIN and 2 Terminals Supplier, Suppliers, Supply, Supplies COMET Data Loggers ~ MOBICON-REMOTE ELECTRONIC SDN BHD

MOBICON-REMOTE ELECTRONIC SDN BHD
19, Jalan PJS 3/59,
Taman Sri Manja,
46000 Petaling Jaya,
Selangor, Malaysia.

+603-7783 2257

+603-7783 4316

sales-kl@mobicon.com.my

+60128188218

Message Us

COMET M1322 Ethernet Multilogger - thermo-hygro-CO2 meter with 2 MiniDIN and 2 Terminals

2 / 40

Quantity

Add Quotation

Product Details

Battery powered datalogger with built-in CO2 sensor and 4 universal inputs for measurement of temperature, humidity, 0-10V voltage, 0-20mA current, two-state signal and for counting pulses.
Multilogger can be installed permanently to Ethernet network or work as portable device.
Included is traceable calibration certificate in accordance with EN ISO/IEC17025.

The device is designed for measuring and recording temperature, humidity, CO2 (internal sensor) with adjustable recording intervals from 1 second to 24 hours.

Datalogger can be connected to Ethernet. Then measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.

on-line monitoring
recording of data
alarm warnings

Code

M1322
Warranty

3 years

TECHNICAL DATA

MEASURED VALUE

Temperature

Relative humidity

Counted values (dew point…)

CO2

Current

Voltage

Two-state signal

Pulses

TEMPERATURE SENSOR - EXTERNAL PROBE PT1000

Measuring range -200 to +600 °C

Accuracy ±0.2 °C (-200 to +100 °C);
±0.2 % from reading from +100 to +600 °C

Resolution 0.1 °C

TEMPERATURE+HUMIDITY SENSOR - EXTERNAL PROBE T+RH DIGI

Measuring range according to the connected probe Digi/M

Accuracy according to the connected probe Digi/M

Resolution 0.1 °C

DEW POINT

Measuring range according to the connected probe Digi/M

Accuracy according to the connected probe Digi/M

Resolution 0.1 °C

CO2 SENSOR

Measuring range 0 to 2 000 ppm

Accuracy 50 ppm + 2 % of the measured value at 23 °C a 1013 hPa

Resolution 1 ppm

DC VOLTAGE

Measuring range 0 to 10 V

Accuracy ±10 mV

Resolution better than 100 µV

DC CURRENT

Measuring range 0 to 20 mA

Accuracy ±20 µA

Resolution better than 0,1 µA

BINARY SIGNAL

Input voltage for level “switched on”/ <0,4 V/> 2 V

Minimum/maximum input voltage 0 V/+30 V DC

I mpedance of the “switched on”/ < 10 kOhm/> 300 kOhm

COUNTER INPUT

Range of counter 24 bit (16 777 215) the counter overflow can be allowed

Maximum input frequency 200 Hz

GENERAL TECHNICAL DATA

Operating temperature -10 to +60 °C

Channels internal CO2 sensor, 2x external temperature probe or connectable temperature+humidity probe,
2x binary, counter, voltage and current input

Counted values dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy

Memory 1 000 000 values (noncyclic record), 600 000 values (cyclic record)

Recording interval 1s to 24 hours

Display and alarm refresh each 10 s

Recording mode noncyclic - data logging stops after filling the memory
cyclic - after filling memory oldest data is overwritten by new

Available temperature units degrees Celsius, degrees Fahrenheit

Communication interface Ethernet, USB, RS232

Ethernet communication protocols WWW, SNMPv1, XML, DATALINK

Alarm protocols E-Mail

Power AC adapter 230Vac/5Vdc (neccessary for Ethernet interface)

Battery life 3 - 4 weeks

Protection class IP20

Dimensions (without connectors) 178 x 95 x 37mm, without attached cables

Weight (including batteries) approx. 380 g

Warranty 3 years

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Messages*

COMET M1322 Ethernet Multilogger - thermo-hygro-CO2 meter with 2 MiniDIN and 2 Terminals

TECHNICAL DATA

MEASURED VALUE

TEMPERATURE SENSOR - EXTERNAL PROBE PT1000

TEMPERATURE+HUMIDITY SENSOR - EXTERNAL PROBE T+RH DIGI

DEW POINT

CO2 SENSOR

DC CURRENT

BINARY SIGNAL

COUNTER INPUT

GENERAL TECHNICAL DATA

Quick Links

Recent Post

Contact